User`s guide

Load Monitor
Running Load Monitor
254 5967–9446
To run Load Monitor for an archive file
Command Line
● Give the command:
loadmon –datafile filespec
Internetwork
Monitor
1 While viewing archive files, select a host (node) or
conversation.
2 Choose Tools➤Network Analysis…
When you start Load Monitor from the command line, the specified
archive file is loaded, and a view window is automatically opened.
When you launch Load Monitor from Internetwork Monitor, Load Mon-
itor is launched against the relevant archive file. A view window is
automatically opened with a Zoom path and focus points appropriate for
the host or conversation you selected and, if configured, any protocol
filter from the internetwork view. For further information, refer to the
“Launching Other Tools” on page 212.
Figure 55 on page 255 shows Load Monitor’s base window and figure 56
on page 260 shows a sample view window. These windows appear when
you start the application.
You can load an archive file after starting Load Monitor by choosing
File➤Load Data… from the base window or view window.
See Also “To load an archive file” on page 336.
“Launching Other Tools” on page 212.
Collector Daemon chapter in Data Collector Reference.