Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsComputer equipmentJ-BERT N4903B
397398399400401402403404405406
:MEASure:EMASk(*):PARameter:BERThresh
:MEASure:EMASk(*):PARameter:BERThresh ZERo|THReshold
:MEASure:EMASk(*):PARameter:BERThresh?
The measurement results, such as, eye height, eye width, and JPPeak are
calculated either using '0 errors'(ZERO) or a specific 'BER Threshold'(THReshold).
In the latter case the numeric value of the threshold is specified with
the :MEASure:EMASk(*):PARameter:BERThresh:THReshold command.
Either ZERo or THReshold.
Either ZERo or THReshold.
:MEASure:EMASk(*):PARameter:BERThresh:THReshold
:MEASure:EMASk(*):PARameter:BERThresh:THReshold
:MEASure:EMASk(*):PARameter:BERThresh:THReshold?
The specific BER threshold.
A value in the range 1e-1 to 1e-12.
The current BER threshold.
:MEASure:EMASk(*):PARameter:WAVform:THReshold
:MEASure:EMASk(*):PARameter:WAVform:THReshold
:MEASure:EMASk(*):PARameter:WAVform:THReshold?
The waveform threshold is a BER value up to which the BER will be represented
on the waveform graph. The valid range is 1e-1 to 1e-6.
Waveform threshold
Waveform threshold
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 401
Syntax
Description
Input
Output
Syntax
Description
Input
Output
Syntax
Description
Input
Output