Technical data

None
Eye Amplitude
:MEASure:EMASk(*):FETCh:RESult:HEIght?
:MEASure:EMASk(*):FETCh:RESult:HEIght?
Eye height is a measurement of the vertical opening of an eye diagram. This opening
is affected by the BER threshold that is set by the BER threshold command. See
“:MEASure:EMASk(*):PARameter:BERThresh” on page 401
None
Eye Height
:MEASure:EMASk(*):FETCh:RESult:WIDth?
:MEASure:EMASk(*):FETCh:RESult:WIDth?
Eye width is a measurement of the horizontal opening of an eye diagram. This
opening is affected by the BER threshold that is set by the BER threshold command.
See “:MEASure:EMASk(*):PARameter:BERThresh” on page 401
None
Eye Width
:MEASure:EMASk(*):FETCh:RESult:JPPeak?
:MEASure:EMASk(*):FETCh:RESult:JPPeak?
Jitter P-P is the full width of the eye diagram at the eye crossing point. This is
affected by the BER threshold that is set by the BER threshold command. See
“:MEASure:EMASk(*):PARameter:BERThresh” on page 401
None
5 SCPI Command Reference
394 Agilent J-BERT N4903B High-Performance Serial BERT
Input
Output
Syntax
Description
Input
Output
Syntax
Description
Input
Output
Syntax
Description
Input