Technical data

Returns the measurement of the mean value of the logical 1 in the eye diagram.

This is directly affected by the values set for Eye Boundaries. See

“:MEASure:EMASk(*):PARameter:MARea” on page 400

None

Low Level Value.

:MEASure:EMASk(*):FETCh:RESult:RISetime?

Rise time is a measurement of the mean transition time of the data on the upward

slope of an eye diagram. This transition time is either 2080 or 1090.

See“:MEASure:EMASk(*):PARameter:TTIMe” on page 398

None

Rise Time

:MEASure:EMASk(*):FETCh:RESult:FALltime?

Fall time is a measurement of the mean transition time of the data on the downward

slope of an eye diagram. This transition time is either 2080 or 1090.

See“:MEASure:EMASk(*):PARameter:TTIMe” on page 398

None

Fall Time

:MEASure:EMASk(*):FETCh:RESult:AMPlitude?

Eye amplitude is the difference between the mean logic 1 level values and the

mean logic 0 level values in a histogram of an eye diagram.

SCPI Command Reference 5

Agilent J-BERT N4903B High-Performance Serial BERT 393

Description

Input

Output

Syntax

Description

Input

Output

Syntax

Description

Input

Output

Syntax

Description