Technical data

• y value
:MEASure:EMASk(*):MASK:ALIGn
:MEASure:EMASk(*):MASK:ALIGn
:MEASure:EMASk(*):MASK:ALIGn?
Sets the mask alignment to either the eye boundaries, or display boundaries. If the
loaded mask is of absolute type, then an error message appears, and the alignment
remains the same.
DISPlay | LEVel | ABSOlute
If the input file type is "ABSO"lute, then the input is ABSOlute, otherwise it is
LEVel. The default setting is LEVel.
N O T E
If the alignment voltages are mentioned in the mask file then this has no effect.
DISPlay | LEVel | ABSOlute
:MEASure:EMASk(*):MASK:ALIGn:VALue?
:MEASure:EMASk(*):MASK:ALIGn:VALue?
Gives the voltage values to which the mask is aligned.
None
Voltage values to which the mask is currently aligned.
:MEASure:EMASk(*):MASK:SCALe:LEVel
:MEASure:EMASk(*):MASK:SCALe:LEVel
:MEASure:EMASk(*):MASK:SCALe:LEVel?
5 SCPI Command Reference
388 Agilent J-BERT N4903B High-Performance Serial BERT
Syntax
Description
Input
Output
Syntax
Description
Input
Output
Syntax