Technical data

MEAS:JTOL:CHAR(*):PAR:SEARch:EBIN:ACC:COARse[?]
IAgilentN490xJCharacterizationMeasurement.SetSearchParameter/
GetSearchParameter
MEAS:JTOLerance:CHAR(*):PARameter:SEARch:EBINary:ACCuracy :COARse
<NR3>
MEAS:JTOL:CHAR(*):PAR:SEARch:EBIN:ACC:COAR?
The command sets the coarse accuracy of an extended binary search. This is the
amplitude step size that is used for locating the pass/fail transition coarsely. The
unit is UI.
The query returns the present value.
MEAS:JTOL:CHAR(*):PAR:SEARch:EBIN:ACC:[FINE][?]
IAgilentN490xJCharacterizationMeasurement.SetSearchParameter/
GetSearchParameter
MEAS:JTOLerance:CHAR(*):PARameter:SEARch:EBINary:ACCuracy [:FINE]
<NR3>
MEAS:JTOL:CHAR(*):PAR:SEARch:EBIN:ACC?
The command sets the fine accuracy of an extended binary search. This is the
amplitude step size that is used after the pass/fail transition has been coarsely
located. The unit is UI.
The query returns the present value.
MEAS:JTOL:CHAR(*):PARameter:SEARch:CURVe:ENABle[?]
MEAS:JTOLerance:CHAR(*):PARameter:SEARch:CURVe:ENABle MIN | MAX, DIS
| ENAB
MEAS:JTOL:CHAR(*):PAR:SEAR:CURV:ENAB? MIN | MAX
This command enables or disables the minimum or maximum jitter curve depending
on the curve type (MIN/MAX).
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 361
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
Syntax
Description