Technical data

Table 101
Name Description under
:FETC:DATA:POINts? “MEAS:JTOL:CHAR
(*):FETC:DATA:POINts?” on page 363
:FETC:DATA:CAPability? “MEAS:JTOL:CHAR
(*):FETC:DATA:CAPability?” on page
364
MEAS:JTOLerance:CHARaracterization:CREate?
IAgilentN490xJitter.CreateMeasurement
(AgilentN490xMeasurementJitterCharacterization)
MEAS:JTOLerance:CHARacterization:CREate?
Creates a Jitter Tolerance Characterization measurement object. The return value
is the handle used to identify this object by any calls to this object. If, for example,
7 is returned, typical calls to this object would be:
• :MEAS:JTOL:CHAR7:PAR:BTES:TBER 1.0e-10
• :MEAS:GEN7:GO
MEAS:JTOL:CHAR(*):PARameter:FLISt[?]
IAgilentN490xJCharacterizationMeasurement.GetFrequencyList
IAgilentN490xJCharacterizationMeasurement.SetFrequencyList
MEAS:JTOLerance:CHAR(*):PARameter:FLISt (<NR3>, <NR3>, ...)
MEAS:JTOL:CHAR(*):PAR:FLIS?
The command specifies a list of jitter frequencies for the measurement, for example
2.5e4, 5.1e6, 4.755e5, and so on. The unit is Hz. The values must be separated by
commas.
The query returns the present setting, a comma-separated list.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 355
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description