Technical data

MEAS:FEMask(*):PARameter:THReshold[:INPut]:TYPE ABSolute | PCT | OFFSet
MEAS:FEMask(*):PARameter:THReshold[:INPut]:TYPE?
Determines how the threshold for the data point is reported:
• ABSolute: Absolute value for the threshold
• OFFSet: Threshold is reported relative to the analyzer threshold.
• PCT: Threshold is reported in percentage:
– 0 % = Low level of the analyzer threshold.
– 100 % = High level of the analyzer threshold
The threshold is returned with the following commands:
• “MEAS:FEMask(*):FETC:DATA[:VALUE]? ” on page 350
• “MEAS:FEMask(*):FETC:DATA:RELative?” on page 350
MEAS:FEMask(*):PARameter:POINt[:VALue][?]
IAgilentN490xEDFastEye.SetMaskPoint(), GetMaskPoint()
MEAS:FEMask(*):PARameter:POINt[:VALue] nIndex, dDelay, dThreshold
MEAS:FEMask(*):PARameter:POINt[:VALue]? nIndex
Specifies the threshold and timing value for the specified point. The query returns
the current values. The following parameters are used:
• nIndex
Index of the data point to be specified/queried, 1 - 32. The number of points is
specified/returned with :NUMBer.
• dDelay
Delay (data type: NRf) for the data point reported according to the TRESolution.
• dThreshold
Threshold (data type: Double) for the data point reported according to the :TYPE.
MEAS:FEMask(*):PARameter:POINt:NUMBer[?]
IAgilentN490xEDFastEye.MaskPointCount
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 349
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent