Technical data

The query returns the setting, not the number of bits actually measured.
MEAS:FEMask(*):PARameter:MERRor:MODE[?]
IAgilentN490xEDFastEye.CheckComparedErrors
MEAS:FEMask(*):PARameter:MERRor:MODE DISable | ENABle
MEAS:FEMask(*):PARameter:MERRor:MODE?
Enables/disables the evaluation of errored bits as criteria for moving to the next
measurement point. The query returns the current state.
MEAS:FEMask(*):PARameter:PFCRiteria[:VALue][?]
IAgilentN490xEDFastEye.BERThreshold
MEAS:FEMask(*):PARameter:PFCRiteria[:VALue] <num>
MEAS:FEMask(*):PARameter:PFCRiteria[:VALue]?
Specifies the maximum allowed bit error rate for determining whether a single
measurement point has passed or failed. The query returns the current setting.
MEAS:FEMask(*):PARameter:TRESolution:TYPE[?]
IAgilentN490xEDFastEye.TimingType
MEAS:FEMask(*):PARameter:TRESolution:TYPE TIME | UINTerval
MEAS:FEMask(*):PARameter:TRESolution:TYPE?
Specifies whether the time parameters are to be specified/returned in seconds
(TIME) or unit intervals (UINT). For details on the unit intervals, see the online Help.
MEAS:FEMask(*):PARameter:THReshold[:INPut]:TYPE[?]
IAgilentN490xEDFastEye.ThresholdType
5 SCPI Command Reference
348 Agilent J-BERT N4903B High-Performance Serial BERT
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent