Technical data

MEAS:GENeric(*):OPC?
IAgilentN490xEDFastEye.GetRunState()
MEAS:GENeric(*):OPC? [BLOCk | NBLock]
This query returns 1 when all pending measurement operations have been finished.
In NBLock (No blocking) mode, it returns "0" if the measurement is not finished.
In BLOCk mode (no argument or with BLOCk as argument), the call waits until the
measurement has finished and then returns "1".
N O T E
The OPC command is inavlid for the Eye Diagram Measurement, because the
measurement is infinitely running.
MEAS:GENeric(*):PROGress?
IAgilentN490xEDFastEye.Progress()
MEAS:GENeric(*):PROGress?
This query returns the progress of the measurement from 0.0 (not started) to 1.0
(completed).
MEAS:GENeric(*):PASSed?
IAgilentN490xEDFastEye.Passed()
MEAS:GENeric(*):PASSed?
This query returns whether or not the measurement passed (0 = failed, 1 = passed).
MEAS:GENeric(*):STATe?
IAgilentN490xEDFastEye.State()
MEAS:GENeric(*):STATe?
5 SCPI Command Reference
342 Agilent J-BERT N4903B High-Performance Serial BERT
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax