Technical data

Table 6
Bit Mnemonic Description
3 OVERHEAT The pattern generator or
error detector has a
higher-than-normal
temperature.
4 GATE ON An accumulated
measurement is in
progress.
5-6 Not used
7 GATE ABORT Indicates that the
repetitive accumulation
period was aborted.
8 BIT ERR The instrument has
detected a bit error.
9-10 Not used
11 CLK/DATA CTR Indicates that the clock/
data alignment is in
progress.
12 DATA 0/1 THR ALIGN Indicates that the 0/1
threshold alignment is in
progress.
13 AUTO ALIGN Indicates that the auto
alignment is in progress.
14 ERR LOC CAPTURE Indicates that there is an
Error Location Capture
measurement in progress.
15 Block Change When a user-defined
sequence is generated:
Reports a transition from
one block to another.
3 Recommended Programming Techniques
34 Agilent J-BERT N4903B High-Performance Serial BERT