Technical data

SYSTem:LICense:HOST?
Licensed options are bound to a certain host. This query returns the host ID as a
quoted string, either MAC address or CPU ID.
SYSTem:LICense:INFO?
IAgilentN490xLicenseOptionInfo
SYSTem:LICense:INFO? <"OptionNumber">
This query returns a quoted string, separated by commas, that describes the
specified option, for example: "J12, Jitter Compliance Suite, 1.0, Yes, SW"
Explanation:
• OptionNumber: e.g. J12
• OptionDescription: e.g. Jitter Compliance Suite
• Version Number: e.g. 1.0
• Installation Status: Yes or No
• Option is hardware or software related: HW, SW
SYSTem:LICense:INSTall
This command is used to activate a licensed option on an instrument.
To activate a licensed option, you need a license file that contains the license code.
This file needs to be installed.
The license file is readable. You can reference the license file or submit its contents.
Therefore, this command has three options.
IAgilentN490xLicenseInstallFile
SYSTem:LICense:INSTall:FILE <"FeatureName">, <"LicenseFilePath">
This command requires that the license file is accessible (e.g. has been copied to
the instrument).
<"FeatureName"> is the name of the license, given as a quoted string (like "Bit
Recovery Mode" or "SSC Generation".
<"LicenseFilePath"> specifies the directory where the license file is stored.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 335
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax for accessing the file
Description