Technical data

Table 96
Name Description under
:INSTrument:External:VISA:RESources
[:ALIases]?
“SYSTem:INSTrument:External:VISA:RE
Sources[:ALIases]?” on page 338
The LICense commands refer to the specific N4903 licensed options.
SYSTem:DISPlay:CLR
SYSTem:DISPlay:CLR
The command closes all popup dialog boxes that are open on the GUI main window.
SYSTem:BEEPer:MODE[?]
IAgilentN490xAudio.Mode (not IVI-compliant)
SYSTem:BEEPer:MODE BERalarm | TONes
SYSTem:BEEPer:MODE?
The command form sets the instrument's audible beeper to trigger on either a
specific BER level (BERalarm) or on any occurrence of errors (TONes).
The response returns the current mode setting of the instrument's audible beeper.
SYSTem:BEEPer:STATe[?]
IAgilentN490xAudio.Enabled (not IVI-compliant)
SYSTem:BEEPer:STATe 0 | 1 | OFF | ON
SYSTem:BEEPer:STATe?
The command turns on and off the instrument's audible beeper. The response
returns whether or not the instrument's audible beeper is turned on.
5 SCPI Command Reference
332 Agilent J-BERT N4903B High-Performance Serial BERT
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description