Technical data

Table 94
Name Description under
[:EVENt]? “STATus:PROTection[:EVENt]? ” on
page 326
:NTRansition[?] “STATus:PROTection:NTRansition[?] ”
on page 327
:PTRansition[?] “STATus:PROTection:PTRansition[?] ”
on page 327
STATus:Protection:CONDition?
IAgilentN490xStatus.Register (not IVI-compliant)
AgilentN490xStatusRegisterEnum.AgilentN490xStatusRegisterProtection
STATus:PROTection:CONDition?
A condition register bit reflects the current state of the protection circuit state in
the instrument. Reading a condition bit does not clear its state.
STATus:PROTection:ENABle[?]
IAgilentN490xStatus.Register (not IVI-compliant)
AgilentN490xStatusRegisterEnum.AgilentN490xStatusRegisterProtection
STATus:PROTection:ENABle <NR1>
STATus:PROTection:ENABle?
The event ENABle register selects which event bit in the corresponding EVENt
register will bet set to TRUE (1) if a protection circuit disable an out-put
automatically.
STATus:PROTection[:EVENt]?
IAgilentN490xStatus.Register (not IVI-compliant)
5 SCPI Command Reference
326 Agilent J-BERT N4903B High-Performance Serial BERT
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent