Technical data

Note that reading the event register clears it.
STATus:OPERation:NTRansition[?]
IAgilentN490xStatus.Register (not IVI-compliant)
STATus:OPERation:NTRansition <NR1>
STATus:OPERation:NTRansition?
This command sets the transition filter state in the Operation Status Register.
When this mask is set to "1", negative (logic 1 changing to logic 0) transitions are
allowed to pass. The query returns the weighted value of the bits that are set to
pass negative transitions in the transition filter. See “Operation Status Register ”
on page 33 for the layout of the Operation Status register.
STATus:OPERation:PTRansition[?]
IAgilentN490xStatus.Register (not IVI-compliant)
STATus:OPERation:PTRansition <NR1>
STATus:OPERation:PTRansition?
This command sets the transition filter state in the Operation Status Register.
When this mask is set to "1", positive transitions (logic 0 changing to logic 1) are
allowed to pass. This is the default setting of the instrument. The query returns
the weighted value of the bits that are set to pass positive transitions in the
transition filter. See “Operation Status Register ” on page 33 for the layout of the
Operation Status register.
5 SCPI Command Reference
322 Agilent J-BERT N4903B High-Performance Serial BERT
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description