Technical data

STATus:CLOSs:PTRansition[?]
IAgilentN490xStatus.Register (not IVI-compliant)
STATus:CLOSs:PTRansition <NR1>
STATus:CLOSs:PTRansition?
This command sets the positive transition register state in the Clock Loss Register.
When a bit in this mask is set to "1", positive transitions (logic 0 changing to logic
1) of this bit are allowed to pass. This is the default setting of the instrument. The
query returns the weighted value of the bits that are set to pass positive transitions
in the transition filter. See “Clock Loss Register” on page 30 for the layout of the
Clock Loss register.
STATus:OPERation Subnode
This subnode has the following SCPI structure:
STATus
:OPERation
:CONDition?
:ENABle[?]
[:EVENt]?
:NTRansition[?]
:PTRansition[?]
This subnode has the following commands:
Table 92
Name Description under
:CONDition? “STATus:OPERation:CONDition? ” on
page 321
:ENABle[?] “STATus:OPERation:ENABle[?] ” on
page 321
[:EVENt]? “STATus:OPERation[:EVENt]? ” on page
321
:NTRansition[?] “STATus:OPERation:NTRansition[?] ” on
page 322
5 SCPI Command Reference
320 Agilent J-BERT N4903B High-Performance Serial BERT
IVI-COM Equivalent
Syntax
Description