Technical data

STATus:CLOSs:ENABle[?]
IAgilentN490xStatus.Register (not IVI-compliant)
STATus:CLOSs:ENABle <NR1>
STATus:CLOSs:ENABle?
The command sets the enable mask in the Clock Loss Register, which allows true
conditions in the event register to be reported in the summary bit. The query returns
the weighted value of the bits that are set in the enable register. See “Clock Loss
Register” on page 30 for the layout of the Clock Loss register.
STATus:CLOSs[:EVENt]?
IAgilentN490xStatus.Register (not IVI-compliant)
STATus:CLOSs[:EVENt]?
The bits in this register indicate pattern generator and error detector clock loss.
This query returns whether the pattern generator or error detector has experienced
the clock loss. See “Clock Loss Register” on page 30 for the layout of the Clock
Loss register.
STATus:CLOSs:NTRansition[?]
IAgilentN490xStatus.Register (not IVI-compliant)
STATus:CLOSs:NTRansition <NR1>
STATus:CLOSs:NTRansition?
This command sets the negative transition register state in the Clock Loss Register.
When a bit in this mask is set to "1", negative (logic 1 changing to logic 0)
transitions of this bit are allowed to pass. The query returns the weighted value of
the bits that are set to pass negative transitions in the transition filter. See “Clock
Loss Register” on page 30 for the layout of the Clock Loss register.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 319
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description