Technical data

PLUGin[:J20]:SINTerference:FREQuency <NR3>
PLUGin[:J20]:SINT:FREQ? MIN | MAX
Sets the frequency of the sinusoidal interference in Hz.
The query returns the present setting or the applicable min/max values.
PLUGin[:J20]:SINTerference:MODE[?]
IAgilentN490xJSinusoidalInterferenceMode
PLUGin[:J20]:SINTerference:MODE DIFFerential | SNORmal | SCOMplement |
COMMon
PLUGin[:J20]:SINT:MODE?
Sets the sinusoidal interference mode.
The query returns the present setting (DIFF, SNOR, SCOM, COMM).
PLUGin[:J20]:ISINterference:TRACe[?]
IAgilentN490xJISIPathLength
PLUGin[:J20]:ISINterference[:SELect]:TRACe <NR1>
PLUGin[:J20]:ISIN:TRAC? MIN | MAX
Selects a trace for the intersymbol interference mode (1 to 9).
The query returns the present setting or the applicable min/max values.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 315
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description