Technical data

In the "Bit Comparison without PCIe3 SKPOS" error ratio mode, this query returns
the “instantaneous” number of SKPOS bits, calculated from the count obtained in
the last deci-second. This value is available even when accumulation is turned off.
[P]FETCh[:SENSe[1]]:MSCount Subnode
This subnode has the following SCPI structure:
[P]FETCh
[:SENSe[1]]
:MSCount
[:ALL][:FULL][:TOTal]?
[:ALL][:FULL]:DELTa?
This subnode has the following commands:
Table 86
Name Description under
[:ALL][:FULL][:TOTal]? “[P]FETCh[:SENSe[1]]:MSCount[:ALL]
[:FULL][:TOTal]?” on page 309
[:ALL][:FULL]:DELTa? “[P]FETCh[:SENSe[1]]:MSCount[:ALL]
[:FULL]:DELTa?” on page 309
[P]FETCh[:SENSe[1]]:MSCount[:ALL][:FULL][:TOTal]?
[P]FETCh[:SENSe[1]]:MSCount[:ALL][:FULL][:TOTal]?
This query is contraction of Modified SKPOS Count.
It returns total number of SKPOS count whose length has been changed by DUT
in a time interval.
[P]FETCh[:SENSe[1]]:MSCount[:ALL][:FULL]:DELTa?
[P]FETCh[:SENSe[1]]:MSCount[:ALL][:FULL]:DELTa?
This query returns the “instantaneous” number of Modified SKPOS count,
calculated from the counts obtained in the last deci-second. This value is available
even when accumulation is turned off.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 309
Syntax
Description
Syntax
Description