Technical data

[P]FETCh[:SENSe[1]]:FSCount Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 85
Name Description under
[:ALL][:FULL][:TOTal]? “[P]FETCh[:SENSe[1]]:FSCount[:ALL]
[:FULL][:TOTal]?” on page 308
[:ALL][:FULL]:DELTa? “[P]FETCh[:SENSe[1]]:FSCount[:ALL]
[:FULL]:DELTa?” on page 308
[P]FETCh[:SENSe[1]]:FSCount[:ALL][:FULL][:TOTal]?
[P]FETCh[:SENSe[1]]:FSCount[:ALL][:FULL][:TOTal]?
This query is contraction of Filler Symbol Count.
In the "8B/10B Symbol Comparison" error ratio mode, it returns total number of
filler symbol count received in a time interval.
In the "Bit Comparison without PCIe3 SKPOS" error ratio mode, it returns total
number of SKPOS bits received in a time interval.
[P]FETCh[:SENSe[1]]:FSCount[:ALL][:FULL]:DELTa?
[P]FETCh[:SENSe[1]]:FSCount[:ALL][:FULL]:DELTa?
In the "8B/10B Symbol Comparison" error ratio mode, this query returns the
"instantaneous" number of filler symbol count, calculated from the counts
obtained in the last deci-second. This value is available even when the
accumulation is turned off.
5 SCPI Command Reference
308 Agilent J-BERT N4903B High-Performance Serial BERT
Syntax
Description
Syntax
Description