Technical data

SENSe[1]:VOLTage:ZOTHreshold:AUTO[?]
IAgilentN490xEDSampling.ZeroOneThresholdTrack (not IVI-compliant)
SENSe[1]:VOLTage:ZOTHreshold:AUTO 0 | 1 | OFF | ON
SENSe[1]:VOLTage:ZOTHreshold:AUTO?
This command enables an automatic mode, in which the 0/1 threshold level is set
to the mean of the input signal.
The query returns the current setting of the hardware discrimination circuit.
SENSe[1]:SFError Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 67
Name Description under
:SFError:FSYMbols[?] “SENSe[1]:SFError:FSYMbols[?] ” on
page 267
:SFError:CFACtor[?] “SENSe[1]:SFError:CFACtor[?] ” on page
267
:SFError:CFACtor:MODe[?] “SENSe[1]:SFError:CFACtor:MODe[?] ”
on page 268
:SFError:ASYMbol[?] “SENSe[1]:SFError:ASYMbol[?]” on
page 268
:SFError:ASYMbol:MODe[?] “SENSe[1]:SFError:ASYMbol:MODe[?]”
on page 268
5 SCPI Command Reference
266 Agilent J-BERT N4903B High-Performance Serial BERT
IVI-COM Equivalent
Syntax
Description