Technical data

SENSe[1]:VOLTage:ZOTHreshold[?]
IAgilentN490xEDSampling.ZeroOneThreshold (IVI-compliant)
SENSe[1]:VOLTage:ZOTHreshold <NR3>
SENSe[1]:VOLTage:ZOTHreshold?
This command sets the level at which the error detector discriminates between a
0 and a 1.
A numeric value parameter sets the level to a given value in Volts. It also
sets :ZOTHreshold:AUTO to OFF.
When in :ZOTHreshold:AUTO OFF, the query returns the last user-entered value.
When in :ZOTHreshold:AUTO ON, the query returns the value automatically
determined by the hardware.
If you are going to use this command to set the 0/1 threshold, first disable the
automatic mode with :ZOTHreshold:AUTO OFF (see “SENSe
[1]:VOLTage:ZOTHreshold:AUTO[?] ” on page 266).
SENSe[1]:VOLTage:ZOTHreshold:RANGe[:HIGH][?]
IAgilentN490xEDSampling.ZeroOneThresholdVHigh (not IVI-compliant)
SENSe[1]:VOLTage:ZOTHreshold:RANGe[:HIGH] <NR3>
SENSe[1]:VOLTage:ZOTHreshold:RANGe[:HIGH]?
Sets/returns the higher limit of the input range of the zero/one threshold.
SENSe[1]:VOLTage:ZOTHreshold:RANGe:LOW[?]
IAgilentN490xEDSampling.ZeroOneThresholdVLow (not IVI-compliant)
SENSe[1]:VOLTage:ZOTHreshold:RANGe:LOW <NR3>
SENSe[1]:VOLTage:ZOTHreshold:RANGe:LOW?
Sets/returns the lower limit of the input range of the zero/one threshold.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 265
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description