Technical data

SENSe[1]:PATTern:UFILe[:LENGth] <filename>, <NR1>
SENSe[1]:PATTern:UFILe[:LENGth]? <filename>
This command sets the length of a user pattern file. The query returns the length
of the user pattern file. If an alternate pattern is selected (:USE APATtern), the
LENGth command sets the length of each half of the pattern.
Note that the :DATA command automatically sets the length of the file.
See “Working with User Patterns in SCPI” on page 63 for information on using this
command.
SENSe[1]:PATTern:UFILe:LABel[?]
IAgilentN490xPGPatternfile.Description (IVI-compliant)
SENSe[1]:PATTern:UFILe:LABel <filename>, <string>
SENSe[1]:PATTern:UFILe:LABel? <filename>
This command sets a description for a user pattern file. The query returns the
description. See “Working with User Patterns in SCPI” on page 63 for information
on using this command.
SENSe[1]:PATTern:UFILe:USE[?]
IAgilentN490xPGPatternfile.Alternate (IVI-compliant)
SENSe[1]:PATTern:UFILe:USE <filename>, STRaight | APATtern
SENSe[1]:PATTern:UFILe:USE? <filename>
This command defines whether a user pattern file should be a straight pattern or
an alternate pattern:
• STRaight
The pattern is repeatedly output.
• APATtern
The pattern is composed of two halves. The output depends on various other
commands; see “How the Serial BERT Uses Alternate Patterns” on page 55 for
more information.
5 SCPI Command Reference
260 Agilent J-BERT N4903B High-Performance Serial BERT
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description