Technical data

SENSe[1]:EYE:THReshold[?]
IAgilentN490xEDSynchronisation.Threshold (IVI-compliant)
SENSe[1]:EYE:THReshold <NR3>
SENSe[1]:EYE:THReshold?
The command sets the BER threshold to be used in the determination of the edges
of the eye.
The query returns the current BER threshold value.
SENSe[1]:EYE:WIDTh?
IAgilentN490xEDSampling.ReadEyeWidth (IVI-compliant)
SENSe[1]:EYE:WIDTh?
This is a query that interrogates the eye width found by the most recent search for
the value of data/clock delay that put the active edge in the center of the data eye.
If the result is not available or the search was unsuccessful, then 9.91E+37 (Not-
A-Number, NAN) will be returned.
SENSe[1]:GATE Subnode
This subnode has the following SCPI structure:
SENSe[1]
:GATE
:MANNer[?]
:MODE[?]
:PERiod
:BITS[?]
:ERRors[?]
[:TIME][?]
[:STATe][?]
:BURSt[?]
This subnode has the following commands:
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 243
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description