Technical data

Status: Stopped; Last ELOC run was ended successfully: an errored bit was
found in the bit stream and its bit position was calculated. The bit position is
returned with ELOC:BEAD?.
• ELOC__FAILED
Status: Stopped; last ELOC run was cancelled either due to a user error or
internal error.
• ELOC__ABORTED
Status: Stopped; last ELOC run was cancelled by the user (either from the user
interface or remotely).
N O T E
Please note that the responses each have two underscores after ELOC.
See the Serial BERT User's Guide and “Using Error Location Capture - Procedures”
on page 46 for additional information.
SENSe[1]:ELOCation:ECOunt?
IAgilentN490xEDErrorLocation.ReadCount (not IVI-compliant)
SENSe[1]:ELOCation:ECOunt?
Returns the number of bit-errors detected within the captured pattern. Is only set
when an ELOC run was successful.
See the Serial BERT User's Guide and “Using Error Location Capture - Procedures”
on page 46 for additional information.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 237
IVI-COM Equivalent
Syntax
Description