Technical data

Table 53
Name Description under
:ELOCation[?] “SENSe[1]:ELOCation[?]” on page 235
:ELOCation:BEADdress “SENSe[1]:ELOCation:BEADdress[?]”
on page 236
:ELOCation:VERBose? “SENSe[1]:ELOCation:VERBose?” on
page 236
:ELOCation:ECOunt? “SENSe[1]:ELOCation:ECOunt?” on page
237
See the Serial BERT User's Guide and “Using Error Location Capture - Procedures”
on page 46 for additional information.
SENSe[1]:ELOCation[?]
IAgilentN490xEDErrorLocation.CaptureErrors (not IVI-compliant)
IAgilentN490xEDErrorLocation.CaptureErrorsComplete (not IVI-compliant)
SENSe[1]:ELOCation ONCE|OFF
SENSe[1]:ELOCation?
ONCE initiates the error location capture measurement. OFF stops a running error
location measurement.
When an errored bit has been found, this command sets the location of the errored
bit as the value that can be queried with SENSe[1]:ELOCation:BEADress?
Note that for an aborted measurement, no result files are generated.
The query returns the Error Location Capture command status. If 1 is returned,
Error Location Capture has been triggered (but is not necessarily running). If 0 is
returned, Error Location Capture has been either aborted (and may be still running)
or successfully finished.
See the Serial BERT User's Guide and “Using Error Location Capture - Procedures”
on page 46 for additional information.
This is an overlapped command.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 235
IVI-COM Equivalent
Syntax
Description