Technical data

This command sets the error ratio mode for the error detector's Data In port.
The query returns the present setting (BER | SER | PCI3BER | USB3BER).
N O T E
The "Bit Comparison without PCIe3 SKPOS" and "Bit Comparison without USB3.1
SKPOS" options are only applicable for PCI Express 3.0 testing and USB 3.1 testing,
respectively.
SENSe[1]:MRErrors Subnode
This subnode has the following SCPI structure:
SENSe[1]
:MRErrors
:COUNt
:LIST?
[:STATe][?]
[:VALue][?]
This subnode has the following commands:
Table 51
Name Description under
:MRErrors[:STATe][?] “SENSe[1]:MRErrors[:STATe][?]” on
page 231
:MRErrors:COUNt[:VALue][?] “SENSe[1]:MRErrors:COUNt[:VALue]
[?]” on page 232
:MRErrors:COUNt:LIST? “SENSe[1]:MRErrors:COUNt:LIST?” on
page 232
SENSe[1]:MRErrors[:STATe][?]
SENSe[1]:MRErrors[:STATe] ON | OFF | 1 | 0
SENSe[1]:MRErrors[:STATe]?
This command enables/disables the "Mask Resync Errors" feature.
The query returns the present setting (0 or 1).
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 231
Description
Syntax
Description