Technical data

INPut[1]:STATe[?]
IAgilentN490xEDDataIn.Enabled (IVI-compliant)
INPut[1]:STATe ON | OFF | 0 | 1
Enables or disables normal data input.
N O T E
It is not possible to disable the Serial BERT's input. This command has no effect.
INPut[1]:CMODe[?]
IAgilentN490xEDDataIn.Mode (IVI-compliant)
INPut[1]:CMODe DIFFerential | NORMal | COMPlement
INPut[1]:CMODe?
Defines the Compare MODE; this defines which input ports (DATA or
DATA) are
active.
The following options are available:
• NORMal
Only the inputs at the DATA are measured.
• COMPlement
Only the inputs at the DATA are measured.
• DIFFerential
The differential between DATA and DATA is measured.
N O T E
Depending on the options of your Serial BERT, DIFFerential inputs may not be
supported at your instrument. See the online Help or the User's Guide for a
description of the available options.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 223
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description