Technical data

SOURce8[:JITTer]:RSSClocking:FREQuency[?]
IAgilentN490xJResidualSpreadSpectrum.Frequency
SOURce8:RSSClocking:FREQuency <NR3>
SOUR8:RSSC:FREQ? MIN | MAX
Sets the frequency of the residual SSC (triangular SJ) in Hz.
The query returns the present setting or the applicable min/max values.
SOURce8[:JITTer]:RSSClocking:LEVel[?]
IAgilentN490xJRSSClocking.Amplitude
SOURce8:RSSClocking:LEVel <NR3>
SOUR8:RSSC:LEV? MIN | MAX
The command sets the residual SSC (triangular SJ) peak-peak level in unit intervals
(UI).
The query returns the present setting or the applicable min/max values in UI.
INPut[1] Subsystem
INPut[1] Subsystem - Reference
The INPut[1] subsystem represents the error detector's Data In port.
5 SCPI Command Reference
220 Agilent J-BERT N4903B High-Performance Serial BERT
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description