Technical data

SOURce8[:JITTer]:SPECtrally Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 47
Name Description under
[:STATe][?] “SOURce8[:JITTer]:SPECtrally[:STATe]
[?] ” on page 217
:LEVel(*)[?] “SOURce8[:JITTer]:SPECtrally:LEVel(*)
[?] ” on page 217
:FILTer[:LPASs][:STATe][?] “SOURce8[:JITTer]:SPECtrally:FILTer
[:LPASs][:STATe][?] ” on page 218
SOURce8[:JITTer]:SPECtrally[:STATe][?]
IAgilentN490xJSpectrallyJitter.Enable
SOURce8:SPECtrally [:STATe] [?] ON | OFF | 1 | 0
SOUR8:SPEC?
This command turns the generation of spectrally distributed jitter either on or off.
The query returns the present setting (0 | 1).
SOURce8[:JITTer]:SPECtrally:LEVel(*)[?]
IAgilentN490xJSpectrallyJitter.Amplitudes
:SOURce8:SPECtrally:LEVel(*) <NR3>
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 217
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax