Technical data

Table 44
Name Description under
:PRBSequence[:SELect][?] “SOURce8
[:JITTer]:BUNCorrelated:PRBSequence
[?] ” on page 205
:PRBSequence:DRATe[?] “SOURce8
[:JITTer]:BUNCorrelated:PRBSequence:
DRATe[?] ” on page 205
:LEVel[?] “SOURce8
[:JITTer]:BUNCorrelated:LEVel[?] ” on
page 206
SOURce8[:JITTer]:BUNCorrelated[:STATe][?]
IAgilentN490xJBoundedUncorrelated.Enable
SOURce8:BUNCorrelated[:STATE] ON | OFF | 1 | 0
SOUR8:BUNC?
Turns the generation of bounded uncorrelated jitter on or off.
The query returns the present setting (0 | 1).
SOURce8[:JITTer]:BUNCorrelated:PRESet[?]
IAgilentN490xJBundedUncorrelated.Standard
SOURce8:BUNCorrelated PRESet CUSTom | CEI6G | CEI11G| BGA
SOUR8:BUNC:PRES?
Can be used to set the PRBS data rate, polynomial and low-pass filter to predefined
values:
CUSTom: The individual parameter values apply.
CEI6G: Meant for CEI 6 Gbit/s tests: PRBS data rate is 1.1 Gbit/s, the PRBS
polynomial is 2
9
-1, the low-pass filter is 100 MHz.
5 SCPI Command Reference
204 Agilent J-BERT N4903B High-Performance Serial BERT
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description