Technical data

Table 41
Name Description under
GLOBal “SOURce8[:JITTer]:GLOBal[:STATE][?] ”
on page 198
Subnodes
:CONFigure “SOURce8[:JITTer]:CONFigure
Subnode” on page 198
:RANDom “SOURce8[:JITTer]:RANDom Subnode”
on page 200
:BUNCorrelated “SOURce8[:JITTer]:BUNCorrelated
Subnode” on page 203
:PERiodic(*) “SOURce8[:JITTer]:PERiodic(*)
Subnode” on page 207
:SINusoidal “SOURce8[:JITTer]:SINusoidal
Subnode” on page 214
:SPECtrally “SOURce8[:JITTer]:SPECtrally
Subnode” on page 217
:RSSClocking “SOURce8[:JITTer]:RSSClocking
Subnode” on page 218
SOURce8[:JITTer]:EXTernal[:STATe][?]
IAgilentN490xJExternal.Enable
SOURce8:EXTernal[:STATe] ON | OFF | 1 | 0
SOUR8:EXT?
Enables/disables the Delay Ctrl input when option J10 is installed. For bandwidth
limitations refer to the technical specifications.
Disabling the input terminates the connector to 50 Ω.
The query returns the present setting (0 | 1).
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 197
IVI-COM Equivalent
Syntax
Description