Technical data

SOURce5:VOLTage:PROTection[:STATe][?]
IAgilentN490xPGAuxOutVoltage.ProtectionState (not IVI-compliant)
SOURce5:VOLTage:PROTection[:STATe] ON | OFF
SOURce5:VOLTage:PROT:STAT?
This command gets the state of the protection circuit at the Aux Output channel.
The 'ON' status indicates a triggered protection circuit or in other words the output
is disabled and no signal comes out.
OUTPut5 Subsystem
OUTPut[5] Subsystem - Reference
The OUTPut[5] subsystem represents the pattern generator's AUX Data Out port.
This subsystem has the following SCPI structure:
OUTPut[5]
:COUPling[?]
:EIDLe
:DATA
:TERMination[?]
[:STATe]
:XOVer[?]
This subsystem has the following commands:
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 189
IVI-COM Equivalent
Syntax
Description