Technical data

SOURce5:MODE[?]
SOURce5:MODE SUBRate | SCHannel | MULTiplexer | DEEMphasis
SOURce5:MODE?
This command sets the mode of Aux Data Output to either of the following:
• Subrate
• Second Channel
• Multiplexer
• De-Emphasis mode
This query returns the presently selected mode.
SOURce5:BIT:OFFSet[?]
SOURce5:BIT:OFFSet
SOURce5:BIT:OFFS?
This command shifts the bit stream at the Aux Data Out (Second Channel) by a bit
in both direction (-1,0, +1 bit). This can only be done in the De-Emphasis mode
This query returns the present settings.
[SOURce[5]]:PATTern:APCHange:SOURce[?]
[SOURce[5]]:PATTern:APCHange:SOURce INTernal | BLANking
[SOURce[5]]:PATTern:APCHange:SOURce?
This command defines how the Serial BERT determines the pattern to be output.
The following alternatives are available:
• INTernal
Executing the command using this parameter will switch off output blanking
for the second channel (Aux Data Out).
• BLANking
Executing the command using this parameter will switch on output blanking
for the second channel (Aux Data Out).
The query returns the current control of the alternate pattern output.
5 SCPI Command Reference
186 Agilent J-BERT N4903B High-Performance Serial BERT
Syntax
Description
Syntax
Description
Syntax
Description