Technical data

SOURce2:VOLTage:ECL
Sets the output AMPLitude and HIGH values to those used for the ECL family. There
is no query form for this command. This command is provided for backwards
compatibility only and is superseded by SOURce2:VOLTage:LLEVel (see
“SOURce2:VOLTage:LLEVel[?] ” on page 169).
SOURce2:VOLTage[:LEVel][:IMMediate][:AMPLitude][?]
IAgilentN490xPGClockVoltage.VAmplitude (IVI-compliant)
SOURce2:VOLTage [:LEVel][:IMMediate][:AMPLitude] <NR3>
SOURce2:VOLTage [:LEVel][:IMMediate][:AMPLitude]?
The command sets the peak to peak value of the Clock Out signal in units of Volts.
The query returns the peak to peak value of the Clock signal in units of Volts.
SOURce2:VOLTage[:LEVel][:IMMediate]:HIGH[?]
IAgilentN490xPGClockVoltage.VHigh (IVI-compliant)
SOURce2:VOLTage[:LEVel][:IMMediate]:HIGH <NR3>
SOURce2:VOLTage[:LEVel][:IMMediate]:HIGH?
The command sets the DC high output level of the pattern generator's Clock Out
port in Volts. The query returns the DC high output level of the pattern generator's
Clock Out port in Volts.
SOURce2:VOLTage[:LEVel][:IMMediate]:LOW[?]
IAgilentN490xPGClockVoltage.VLow (IVI-compliant)
SOURce2:VOLTage[:LEVel][:IMMediate]:LOW <NR3>
SOURce2:VOLTage[:LEVel][:IMMediate]:LOW?
The command sets the DC low output level of the pattern generator's Clock Out
port in Volts. The query returns the DC low output level of the pattern generator's
Clock Out port in Volts.
5 SCPI Command Reference
168 Agilent J-BERT N4903B High-Performance Serial BERT
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax