Technical data

Table 35
Name Description under
:VOLTage[:LEVEL][:IMMediate]:HIGH[?] “SOURce2:VOLTage[:LEVel]
[:IMMediate]:HIGH[?] ” on page 168
:VOLTage[:LEVEL][:IMMediate]:LOW[?] “SOURce2:VOLTage[:LEVel]
[:IMMediate]:LOW[?] ” on page 168
:VOLTage[:LEVEL][:IMMediate]:OFFSet
[?]
“SOURce2:VOLTage[:LEVel]
[:IMMediate]:OFFSet[?] ” on page 169
:VOLTage[:LEVEL]:LLEVel “SOURce2:VOLTage:LLEVel[?] ” on page
169
:VOLTage:PROTection:RESet[?] “SOURce2:VOLTage:PROTection:RESet
[?] ” on page 169
:VOLTage:PROTection[:STATe][?] “SOURce2:VOLTage:PROTection
[:STATe][?] ” on page 170
:DIVider[?] “SOURce2:DIVider[?] ” on page 170
SOURce2:FREQuency[:CW|:FIXed]?
IAgilentN490xPGClockIn.GetFrequency (IVI-compliant)
SOURce2:FREQuency[:CW|:FIXed]? [MIN|MAX]
This query returns the bit rate of the measured frequency from internal or external
clock.
N O T E
This query is superseded by SENSe6:FREQuency [:CW|:FIXed]?
SOURce2:VOLTage:ECL
IAgilentN490xPGClock.LogicLevel (not IVI-compliant)
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 167
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent