Technical data

SOURce9:SSCLocking:FREQuency[?]
IAgilentN490xPGSpreadSpectrum.ModulationFrequency
SOURce9:SSCLocking:FREQuency <NR3>
SOURce9:SSCL:FREQ? MIN | MAX
Sets the frequency of the SSC in Hz.
The query returns the present setting or the applicable min/max values.
SOURce9:SSCL:DISTribution[?]
IAgilentN490xPGSpreadSpectrum.DISTribution
SOURce9:SSCLocking::DISTribution[?]
SOURce9:SSCL::DIST? DATA | CLOCk | BOTH
The Spread Spectrum Clocking setting influences the pattern generator's outputs.
When SSC is enabled, it can have an impact on the Data Out, Clock Out, Trigger
Out and Aux Out of the generator.
The instrument has one internal source for Spread Spectrum Clocking (SSC) and
residual Spread Spectrum Clock (rSSC). So, Spread Spectrum Clocking is not
available if the residual Spread Spectrum Clocking (rSSC) is enabled.
SOURce2 Subsystem
SOURce2 Subsystem - Reference
The SOURce2 Subsystem represents the pattern generator's Clock Out port.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 165
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description