Technical data

Table 34
Name Description under
:SSCLocking:DEViation:TYPE[?] “SOURce9:SSCLocking:DEViation:TYPE
[?]” on page 163
:SSCLocking:DEViation:PROFile[?] “SOURce9:SSCLocking:DEViation:PROFi
le[?] ” on page 164
:SSCLocking:DEViation:SHAPe[?] “SOURce9:SSCLocking:DEViation:SHAP
e[?] ” on page 164
:SSCLocking:FREQuency[?] “SOURce9:SSCLocking:FREQuency[?] ”
on page 165
:SSCLocking:DISTribution[?] “SOURce9:SSCL:DISTribution[?] ” on
page 165
SOURce9:FREQuency[:CW|FIXed][?]
IAgilentN490xPGClock.Frequency (IVI-compliant)
SOURce9:FREQuency[:CW|:FIXed] <NR3>
SOURce9:FREQuency[:CW|:FIXed]? <NR3> | <MIN | MAX>
This command may be used to configure the internal clock source frequency. You
can also use any of the forms listed below:
• SOURce9:FREQuency
• SOURce9:FREQuency:CW
• SOURce9:FREQuency:FIXed
There is no difference between any of these forms.
The response returns the current internal clock source frequency.
SOURce9:OUTPut[:STATe][?]
IAgilentN490xPGClockIn.Mode (IVI-compliant)
SOURce9:OUTPut[:STATe] EXT | INT
5 SCPI Command Reference
162 Agilent J-BERT N4903B High-Performance Serial BERT
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax