Technical data

OUTPut[1]:CLOCk Subnode
This subnode has the following SCPI structure:
:CLOCk
[:ENABle][?]
:FREQuency
:MULTiplier
:TERMination?
:COUPling[?]
[:VALue][?]
:TRACk[?]
[:VALue][?]
:LIST?
Commands applicable for N4916B
The commands included in this subnode are applicable for N4916B. This subnode
has the following commands:
Table 33
Name Description under
Commands applicable for N4916B
:CLOCk[:ENABle][?] “OUTPut[1]:CLOCk[:ENABle][?]” on
page 158
:CLOCk:FREQuency[:VALue][?] “OUTPut[1]:CLOCk:FREQuency[:VALue]
[?]” on page 158
:CLOCk:FREQuency:TRACk[?] “OUTPut[1]:CLOCk:FREQuency:TRACk
[?]” on page 158
:CLOCk:MULTiplier[:VALue][?] “OUTPut[1]:CLOCk:MULTiplier[:VALue]
[?]” on page 159
:CLOCk:MULTiplier:LIST? “OUTPut[1]:CLOCk:MULTiplier:LIST?”
on page 159
:CLOCk:TERMination[?] “OUTPut[1]:CLOCk:TERMination[?]” on
page 159
:CLOCk:COUPling[?] “OUTPut[1]:CLOCk:COUPling[?]” on
page 160
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 157