Technical data

OUTPut[1]:MULTiplexer:INTerference:DMODe?
This command is applicable for M8061A. The command enables/disables the
differential mode interference (DMI) feature. The differential mode interference
(symmetrical mode) is independent of ground.
The query returns the present state.
OUTPut[1]:MULTiplexer:INTerference:DMODe:GAIN[?]
OUTPut[1]:MULTiplexer:INTerference:DMODe:GAIN <NRf>
OUTPut[1]:MULTiplexer:INTerference:DMODe:GAIN?
This command is applicable for M8061A. The command sets the gain of the
differential mode interference.
The query returns the present setting.
OUTPut[1]:MULTiplexer:VOLTage[:AMPLitude][?]
OUTPut[1]:MULTiplexer:VOLTage:AMPLitude <NRf>
OUTPut[1]:MULTiplexer:VOLTage:AMPLitude?
This command is applicable for M8061A. The command sets the peak-to-peak value
of the data signal in volts.
The query returns the peak-to-peak value of the data signal in volts.
OUTPut[1]:MULTiplexer:VOLTage:OFFSet[?]
OUTPut[1]:MULTiplexer:VOLTage:OFFSet <NRf>
OUTPut[1]:MULTiplexer:VOLTage:OFFSet?
This command is applicable for M8061A. The command sets the mean of the high
and low output level in volts.
The query returns the mean of the high and low output level in volts.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 153
Description
Syntax
Description
Syntax
Description
Syntax
Description