Technical data

This command is applicable for N4876A and M8061A. The command sets the f/2
jitter at the DATA OUT port in the units of seconds.
The query returns the present state.
OUTPut[1]:MULTiplexer:COUPling[?]
OUTPut[1]:MULTiplexer:COUPling AC | DC
OUTPut[1]:MULTiplexer:COUPling?
This command is applicable for M8061A. The command sets the coupling type of
amplifier to either AC or DC. This parameter can only be changed if the output is
off (disabled).
The query returns the present state.
OUTPut[1]:MULTiplexer:DEEMphasis:UNIT[?]
OUTPut[1]:MULTiplexer:DEEMphasis:UNIT DB | PERC
OUTPut[1]:MULTiplexer:DEEMphasis:UNIT?
This command is applicable for M8061A. The command sets the units of pre-
cursors and post-cursors in either decible or percentage.
The query returns the present setting.
OUTPut[1]:MULTiplexer:DEEMphasis:PRESet[?]
OUTPut[1]:MULTiplexer:DEEMphasis:PRESet < 1 >, < NRf >,< NRf >,< NRf >,<
NRf >,< NRf >,< NRf >,< NRf >
OUTPut[1]:MULTiplexer:DEEMphasis:PRESet?
This command is applicable for M8061A. The command sets the value of pre-
cursors and post-cursors to user-defined values.
The query returns the present setting.
Example:
OUTP1:MULT:DEEM:PRES? 1
5 SCPI Command Reference
150 Agilent J-BERT N4903B High-Performance Serial BERT
Description
Syntax
Description
Syntax
Description
Syntax
Description