Technical data

OUTPut[1]:DEEMphasis:MODE DB | PERCent
OUTPut[1]:DEEMphasis:MODE?
This command is applicable for N4916A/B. The command toggles the unit of the
de-emphasis value between dB and percent. The mode is used for interpreting the
value.
The query returns the present state: DB | PERC.
OUTPut[1]:DEEMphasis[:VALue][?]
IAgilentN490xPGOutput.DeEmphasis
OUTPut[1]:DEEMphasis[:VALue] <NR3>
OUTPut[1]:DEEMphasis[:VALue]?
OUTPut[1]:DEEMphasis?
This command is applicable for N4916A/B. The command sets the de-emphasis
value of the N4916A/B De-Emphasis Signal Converter. The value must conform to
the present mode (dB or percent). For example, a de-emphasized signal that
reduces the normal amplitude of a bit to one quarter would require a value of 25%
or 12 dB.
The query returns the present value in floating point format. The value refers to
the current mode.
OUTPut[1]:DEEMphasis:IDN?
IAgilentN490xPGOutput.DeEmphasisIdentification
OUTPut[1]:DEEMphasis:IDN?
This query is applicable for N4916A/B. The query returns the identification of the
N4916A/B De-Emphasis Signal Converter as a string.
OUTPut[1]:DEEMphasis:UPDate[?]
IAgilentN490xPGOutput.DeEmphasisUpdate
5 SCPI Command Reference
142 Agilent J-BERT N4903B High-Performance Serial BERT
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent