Technical data

Table 31
Name Description under
:DEEMphasis:IDN? “OUTPut[1]:DEEMphasis:IDN? ” on page
142
:DEEMphasis:UPDate[?] “OUTPut[1]:DEEMphasis:UPDate[?] ” on
page 142
Commands applicable for N4916B
:DEEMphasis:PRECursor[?] “OUTPut[1]:DEEMphasis:PRECursor[?]
” on page 143
:DEEMphasis:POSTcursor(*)[?] “OUTPut[1]:DEEMphasis:POSTcursor(*)
[?] ” on page 143
:DEEMphasis:OPTion? “OUTPut[1]:DEEMphasis:OPTion? ” on
page 144
:DEEMphasis:INPut[:SAMPle]:ADJust
[?]
“OUTPut[1]:DEEMphasis:INPut
[:SAMPle]:ADJust[?] ” on page 144
OUTPut[1]:DEEMphasis:ENABle[?]
IAgilentN490xPGOutput.DeEmphasisEnable
OUTPut[1]:DEEMphasis:ENABle 0 | 1 | OFF | ON
OUTPut[1]:DEEMphasis:ENABle?
This command is applicable for N4916A/B. The command enables/disables an
N4916A/B De-Emphasis Signal Converter that is connected between the Data Out
of the pattern generator and the DUT. The command is equivalent to pressing the
Enable button on selecting the De-Emphasis check box.
The query returns the present state.
OUTPut[1]:DEEMphasis:MODE[?]
IAgilentN490xPGOutput.DeEmphasisMode
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 141
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent