Technical data

The DISConnected command sets the voltage at the pattern generator's Data Out,
Clock Out, Aux Data Out and Trigger/Ref Clock Out ports to 0 V, the CONNected
command re-enables the output (to the normal data pattern).
The query returns the current state.
OUTPut[1]:COUPling[?]
IAgilentN490xPGOutput.TerminationEnabled (IVI-compliant)
OUTPut[1]:COUPling AC | DC
OUTPut[1]:COUPling?
The command enables or disables the source of the termination voltage:
• DC: Enables the termination voltage
• AC: Disables the termination voltage
The query returns the current state.
OUTPut[1]:DATA:XOVer[?]
IAgilentN490xPGOutput.Crossover (IVI-compliant)
OUTPut[1]:DATA:XOVer <NR1.>
OUTPut[1]:DATA:XOVer? [MINimum | MAXimum]
The command sets the eye crossover of the pattern generator's Data Out port.
Crossover can only be changed in NRZ signal mode.
The query returns the current crossover setting.
OUTPut[1]:DCYCle[?]
IAgilentBertPGPulse.DutyCycle
OUTPut[1]:DCYCle <NR1>
OUTPut[1]:DCYCle?
5 SCPI Command Reference
136 Agilent J-BERT N4903B High-Performance Serial BERT
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax