Technical data

The command sets the peak-to-peak value of the data signal in units of Volts. The
query returns the peak-to-peak value of the data signal in units of Volts.
[SOURce[1]]:VOLTage[:LEVel][:IMMediate]:HIGH[?]
IAgilentN490xPGOutVoltage.VHigh (IVI-compliant)
[SOURce[1]]:VOLTage[:LEVel][:IMMediate]:HIGH <NR3>
[SOURce[1]]:VOLTage[:LEVel][:IMMediate]:HIGH?
The command sets the DC low output level in units of Volts. The query returns the
DC low output level in units of Volts.
[SOURce[1]]:VOLTage[:LEVel][:IMMediate]:LOW[?]
IAgilentN490xPGOutVoltage.VLow (IVI-compliant)
[SOURce[1]]:VOLTage[:LEVel][:IMMediate]:LOW <NR3>
[SOURce[1]]:VOLTage[:LEVel][:IMMediate]:LOW?
The command sets the DC low output level in units of Volts. The query returns the
DC low output level in units of Volts.
[SOURce[1]]:VOLTage[:LEVel][:IMMediate]:OFFSet[?]
IAgilentN490xPGOutVoltage.VOffset (IVI-compliant)
[SOURce[1]]:VOLTage[:LEVel][:IMMediate]:OFFSet <NR3>
[SOURce[1]]:VOLTage[:LEVel][:IMMediate]:OFFSet?
The command sets the mean of the high and low DC output level in units of Volts.
The query returns the mean of the high and low DC output level in units of Volts.
[SOURce[1]]:VOLTage[:LEVel]:LLEVel[?]
IAgilentN490xPGOutput.LogicLevel (not IVI-compliant)
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 131
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent