Technical data

A Typical SerialBERT Program

A Typical Serial BERT Program - Concepts

The Serial BERT can be controlled by a remote program using the IVI-COM driver.

The sections of this Help provide you with information you can use to quickly get

started with your first program. The examples here are written for Visual Basic 6.0,

but can also be ported to any programming language supported by IVI-COM.

You can use the following links to find Agilent's IVI-COM help resources in the

internet:

• ADN Introducing IVI-COM Drivers:

www.agilent.com/find/adnivicominfo

• ADN IVI-COM Briefs and Papers:

www.agilent.com/find/adnivicompapers

• ADN IVI-COM Drivers and Components Downloads:

www.agilent.com/find/adnivicomdrivers

• ADN Drivers and Software Downloads:

www.agilent.com/find/adndownloads

Prerequisites

Prerequisites - Concepts

Before you can control a Serial BERT remotely, the client computer (your PC, the

Serial BERT is the host) must meet the following prerequisites:

• Agilent IO Libraries Suite installed

Agilent J-BERT N4903B High-Performance Serial BERT

Programming Guide

Agilent Technologies 13