Technical data

[SOURce[1]]:PATTern:UFILe:LABel[?]
IAgilentN490xLocalPatternfile.Description (IVI-compliant)
[SOURce[1]]:PATTern:UFILe:LABel <filename>, <string>
[SOURce[1]]:PATTern:UFILe:LABel? <filename>
This command sets a description for a user pattern file. The query returns the
description. See “Working with User Patterns in SCPI” on page 63 for information
on using this command.
[SOURce[1]]:PATTern:UFILe:NAME?
IAgilentN490xLocalPatternfile.Location (IVI-compliant)
[SOURce[1]]:PATTern:UFILe:NAME?
This query returns the file name of the currently used user pattern. It is only valid
if SOURce1:PATTern:SELect? returns UPAT.
[SOURce[1]]:PATTern:UFILe:USE[?]
IAgilentN490xLocalPatternfile.Alternate (IVI-compliant)
[SOURce[1]]:PATTern:UFILe:USE <filename>, STRaight | APATtern
[SOURce[1]]:PATTern:UFILe:USE? <filename>
STR | APAT
This command defines whether a user pattern file should be a straight pattern or
an alternate pattern:
• STRaight
The pattern is repeatedly output.
• APATtern
The pattern is composed of two halves. The output depends on various other
commands; see “How the Serial BERT Uses Alternate Patterns” on page 55 for
more information.
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 123
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Description
IVI-COM Equivalent
Syntax
Return Range
Description