Technical data

SOURce[1]:PATTern:SEQuence:STATe?
This query returns the number of the sequence block that is currently executed. It
can be used to determine whether the command SOURce
[1]:PATTern:SEQuence:EVENt is adequate.
Query results:
-1 No user sequence activated
0 Sequence start condition not fulfilled
(init state, no data)
1 ... 4 The number of the block currently
executed
N O T E
The pattern generator is polled every 200 ms. The answer can be incorrect if the
execution time of a block is not sufficiently long.
The transition from one block to another is also signaled with a flag in the status
subsystem (bit #15 in the Operation Status Register).
[SOURce[1]]:PATTern:UFILe Subnode
This subnode has the following SCPI structure:
[SOURce[1]:]
PATTern
:UFILe
:DATA[?]
:IDATa[?]
[:LENGth][?]
:LABel[?]
:NAME?
:USE[?]
This subnode has the following commands:
5 SCPI Command Reference
118 Agilent J-BERT N4903B High-Performance Serial BERT
Syntax
Description