Technical data

This command is only active when a ZSUB pattern has been selected (see
“[SOURce[1]]:PATTern[:SELect][?] ” on page 104).
The minimum value is the PRBN value. The maximum value is length of the pattern
- 1. So, for a PRBN 2^7 pattern, the minimum value is 7, and the maximum value
is 127 (2^7 - 1).
[SOURce[1]]:PATTern:APCHange Subnode
This subnode has the following SCPI structure:
[SOURce[1]:]
:PATTern
:APCHange
:IBHalf
:MODE[?]
:SELect[?]
:SOURce[?]
This subnode has the following commands:
Table 17
Name Description under
:IBHalf “[SOURce
[1]]:PATTern:APCHange:IBHalf ” on
page 108
:MODE[?] “[SOURce
[1]]:PATTern:APCHange:MODE[?] ” on
page 108
:SELect[?] “[SOURce
[1]]:PATTern:APCHange:SELect[?] ” on
page 109
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 107
Range