Technical data

Table 14
Name Description under
:EADDition:SELect[?] “[SOURce
[1]]:PATTern:EADDition:SELect[?] ” on
page 103
:FORMat[:DATA][?] “[SOURce[1]]:PATTern:FORMat[:DATA]
[?] ” on page 103
:MDENsity[:DENSity][?] “[SOURce[1]]:PATTern:MDENsity
[:DENSity][?] ” on page 104
[:SELect][?] “[SOURce[1]]:PATTern[:SELect][?] ” on
page 104
:ZSUBstitut[:ZRUN][?] “[SOURce[1]]:PATTern:ZSUBstitut
[:ZRUN][?]” on page 106
Subnodes
:APCHange “[SOURce[1]]:PATTern:APCHange
Subnode” on page 107
SEQuence “[SOURce[1]]:PATTern:SEQuence
Subnode” on page 111
:UFILe “[SOURce[1]]:PATTern:UFILe Subnode”
on page 118
:UPATtern<n> “[SOURce[1]]:PATTern:UPATTern
Subnode” on page 124
This subnode has the following commands:
[SOURce[1]]:PATTern:EADDition[?]
IAgilentN490xPGErrorAddition.InsertManually (not IVI-compliant)
[SOURce[1]]:PATTern:EADDition <EADD>
[SOURce[1]]:PATTern:EADDition?
SCPI Command Reference 5
Agilent J-BERT N4903B High-Performance Serial BERT 101
IVI-COM Equivalent
Syntax